Chloride: Difference between revisions
| Line 20: | Line 20: | ||
== How to adjust the chloride level == | == How to adjust the chloride level == | ||
Chloride ion may be added with [[calcium chloride]], [[sodium chloride]], [[potassium chloride]], or [[magnesium chloride]] salts. When adjusting chloride levels, also consider the relative level of sulfate. See [[Water]] for our guide to adjusting water minerals and mash pH. | Chloride ion may be added with [[calcium chloride]], [[sodium chloride]], [[potassium chloride]], or [[magnesium chloride]] salts. When adjusting chloride levels, also consider the relative level of sulfate. See [[Water]] for our guide to adjusting water minerals and mash pH, including more information on the sulfate-to-cloride ratio. | ||
The drinking water standard limit for chloride is 250 mg/L, which coincides with our suggested maximum level. Therefore, removal of excessive chloride isn't likely something that will be needed. However, purification by [[RO systems|reverse osmosis filtration]] is a good option to remove practically all chloride and other minerals so that the water mineral profile can be built from scratch. | The drinking water standard limit for chloride is 250 mg/L, which coincides with our suggested maximum level. Therefore, removal of excessive chloride isn't likely something that will be needed. However, purification by [[RO systems|reverse osmosis filtration]] is a good option to remove practically all chloride and other minerals so that the water mineral profile can be built from scratch. | ||
Revision as of 00:35, 1 May 2024
Please check back later for additional changes
Chloride ion (Cl-) is a mineral naturally present in water and malt. The chloride ion helps accentuate the malt sweetness, the palate fullness of beer, and the roundedness of the flavors.[1] There's a wide range of suggestions for the maximum level of chloride in brewing water, ranging from 80 to 250 mg/L.[1][2][3][4][5] In line with the more recent books, we recommend a maximum chloride level of 250 mg/L for most styles of beer.[5][6] Above that, chloride begins to taste salty. For styles like Gose that intentionally have a salty or mineral flavor, a chloride level up to 400 mg/L may be used.[1] Excessive levels of chloride in the water (over 400 mg/L) can have adverse effects on beer flavor and detract from drinkability.[1][7] Yeast performance can also be negatively affected, especially over 500 mg/L.[1]
Chloride ion should not be confused with chlorine used for disinfection.
Beer chloride content: ?
Potential sources of chloride
The chloride content in beer comes from the raw ingredients, mainly the water and grist, plus any salts added by the brewer.
- Brewing water -
- Grain -
- Salt additives - Several different brewing salts can be used to increase water chloride content, such as calcium chloride or sodium chloride.
Effects of chloride
In the context of brewing beer, chloride ion has several important effects.
- Improved flavor and palate - At around 50 to 250 mg/L in beer, chloride provides a roundness, fullness, and a sweet quality to the malt character.[1][3][6][7][8][9] The key influence of chloride on beer flavor is somewhat antagonistic to sulfate, producing smoothness and body effects.[6] The ratio of chloride to sulfate helps to regulate the saline/bitter character of beer.[3] The ratio between chloride and sulfate is thought to be important with regard to regulating the palatability of the beer.[7] Excessive levels can give beer a "pasty texture".[7]
- Clarification - Over 300 ppm, chloride can have negative effects on beer clarification, body, and colloidal stability.[1] High levels are reported to limit yeast flocculation but to improve beer clarification and colloidal stability.[3]
- Corrosion - Chloride ion is potentially corrosive to stainless steel.[10] For hot water in prolonged contact with your stainless steel brewing equipment (e.g. a hot liquor tank), ideally the chloride level of the water should be below 50 to 100 mg/L.[10][1][2][4] If any chloride-containing salts will be used, they should be added immediately prior to mash-in in order to avoid prolonged contact. The corrosive effects of chloride disappear once the water becomes wort.[4]
How to adjust the chloride level
Chloride ion may be added with calcium chloride, sodium chloride, potassium chloride, or magnesium chloride salts. When adjusting chloride levels, also consider the relative level of sulfate. See Water for our guide to adjusting water minerals and mash pH, including more information on the sulfate-to-cloride ratio.
The drinking water standard limit for chloride is 250 mg/L, which coincides with our suggested maximum level. Therefore, removal of excessive chloride isn't likely something that will be needed. However, purification by reverse osmosis filtration is a good option to remove practically all chloride and other minerals so that the water mineral profile can be built from scratch.
See also
- Water - Expert guide to adjusting water minerals
- Calcium chloride - Brewing salt
- Sodium chloride - Brewing salt
- Potassium chloride - Brewing salt
- Magnesium chloride - Brewing salt
References
- ↑ a b c d e f g h Palmer J, Kaminski C. Water: A Comprehensive Guide for Brewers. Brewers Publications; 2013.
- ↑ a b Krottenthaler M, Glas K. Brew water. In: Esslinger HM, ed. Handbook of Brewing: Processes, Technology, Markets. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA; 2009.
- ↑ a b c d Briggs DE, Boulton CA, Brookes PA, Stevens R. Brewing Science and Practice. Woodhead Publishing Limited and CRC Press LLC; 2004.
- ↑ a b c Eumann M. Chapter 9: Water in brewing. In: Bamforth CW, ed. Brewing: New Technologies. Woodhead Publishing; 2006:183–207.
- ↑ a b Barth R, Farber M. Mastering Brewing Science: Quality and Production. Wiley; 2019:114.
- ↑ a b c Taylor DG. Water. In: Stewart GG, Russell I, Anstruther A, eds. Handbook of Brewing. 3rd ed. CRC Press; 2017.
- ↑ a b c d Howe S. Raw materials. In: Smart C, ed. The Craft Brewing Handbook. Woodhead Publishing; 2019.
- ↑ Comrie AA. Brewing liquor—a review. J Inst Brew. 1967;73(4):335–346.
- ↑ Montanari L, Mayer H, Marconi O, Fantozzi P. Chapter 34: Minerals in beer. In: Preedy VR, ed. Beer in Health and Disease Prevention. Academic Press; 2009:359–365.
- ↑ a b Eumann M, Schildbach S. 125th Anniversary review: Water sources and treatment in brewing. J Inst Brew. 2012;118:12–21.